Whether you have a leaking drain hose or you are having trouble with a switch, it is important to know the proper way to repair your washer. This article has a few tips that you can use to help you out.
Fixing a broken pump or agitator
During a wash cycle, a washing machine’s agitator rotates back and forth, pushing clothes down in the water. Depending on your model, the agitator may be a single piece or two-part unit. Some washers use a drive coupler to transfer power to the agitator.
A coupler is a triangular or circular piece that fits between the agitator and the transmission shaft. It is secured with a bolt and will wear out with time. If you hear a grinding or humming noise during the wash cycle, the coupling may be damaged.
A coupler can also wear out due to overloading the machine. A foreign object may also jam it, causing a humming or buzzing noise. If the drain hose is kinked, it may also slow down the washing machine’s draining process.
A faulty timer may also cause the drive motor to malfunction. Depending on your model, you may have to remove the top cover to access the motor. This will expose the timer. You may be able to test the timer using a multimeter to determine if it is working correctly.
Fixing a leaky drain hose
Whether you need to fix a leaky drain hose for a washer repairman or are looking for a way to avoid floods, checking your washing machine hoses is a good way to prevent leaks. Inspecting the hoses will let you know if there is a problem, such as a hole or split. If the hose is damaged, replacing it is the best option.
The drain hose connects the washing machine to the main water supply. This hose will help transport dirty water to the drain pump. Some drain hoses are secured by a clamp. To repair a leaky drain hose, you can use waterproof sealant or flex tape.
Inspect the hoses for cracks, splits or debris. If you see any, you can use a plumbing auger to clean the hose. You can also use a flashlight to look for bubbles and cracks.
If you don’t have a plumbing auger, you can borrow one from a friend. You can also rent one at a home improvement store.
Fixing a broken switch
Using a multi-meter to test a broken washer switch is a good way to diagnose the problem. You can also test the wiring using a continuity tester to check for electrical continuity.
A broken washer switch usually needs to be replaced. In most cases, the replacement process is fairly simple and does not take long to complete.
First, you need to open up your washer. This will allow you to gain access to all the sides of your machine. You will need to lift the top panel up and lower it to get access to the switch lock assembly.
The lid switch on your washer is an important part. It is designed to prevent injuries. However, it is often malfunctioning. Some top loading washers use a magnetic lid switch. When the lid is closed, the magnets inside the lid trip the switch mechanism. This is a good thing. However, a lid switch that is malfunctioning will not supply power to the motor circuits.
Fixing too many suds
Having excessive suds in your washing machine can be a problem. Suds are a result of the liquid detergent frothing up. The froth is created when soap mixes with air. If too much detergent is used, the suds will build up and prevent the washing machine from draining properly.
Suds can also be caused by a number of factors. One reason may be a clogged drain hose. Another may be a damaged or clogged pump. You may also have items wedged inside the washer, which can block the drain.
If the washing machine is producing excessive suds, you may need to change the type of detergent you use. You may also need to add an extra rinse cycle to help break up the suds.
Suds may also be caused by a faulty water-inlet valve. You may also need to change the belt or realign the belt. Adding more water may also help but may not reduce the amount of suds produced.